🚚 Transport GRATUIT pentru comenzi peste 250 Lei  •  ↩️ Retur gratuit 30 zile  •  ⭐ Brand Premium NeoSimply
NeoSimply

Tehnici de laminare în vid pentru panouri solare în România

Quick answer: Tehnicile de laminare în vid sunt esențiale pentru a preveni pătrunderea umidității și delaminarea în panourile policristaline în condiții de umiditate ridicată și îngheț-dezgheț. Aceste metode asigură o adeziune puternică între straturi, reducând riscul de coroziune și deteriorare a celulelor solare [3].

Panourile solare din România sunt expuse unor condiții extreme: variații mari de temperatură, ploaie frecventă și îngheț sever în sezonul winter. În aceste medii, durabilitatea și performanța panourilor depind în mare măsură de tehnologiile de fabricare folosite, mai ales de procesul de laminare. O laminare incorectă poate duce la pătrunderea umidității, delaminare și degradare prematură a celulelor solare.

Tehnici de laminare în vid pentru rezistență la umiditate și îngheț

Laminarea în vid este o metodă avansată care elimină aerul dintre straturile panoului solar, asigurând o adeziune completă și uniformă între sticlă, celule și materialul de encapsulare. Această tehnică este esențială pentru a preveni pătrunderea umidității și a vaporilor de apă care ar putea deteriora celulele solare [3]. În condiții de îngheț-dezgheț, materialele se extind și contractă, iar o adeziune slabă poate duce la microfisuri și deteriorarea legăturilor de sudură [5]. Laminarea în vid reduce aceste riscuri prin crearea unei structuri monolitice rezistente la stres termic.

Rolul adezivilor și a materialelor rezistente la UV

Pentru a preveni delaminarea în medii umede, este crucial să se utilizeze un strat de adeziv suficient și uniform aplicat pe suprafața de sticlă superstrat înainte de encapsulare [3]. Materialele precum EVA (etilen-vinil acetat) sau Tedlar® sunt frecvent utilizate datorită rezistenței lor la UV și la deteriorare termică [1]. Un strat de protecție împotriva UV, puternic absorbant în gama de lungimi de undă ultraviolete, este esențial pentru a preveni degradarea panourilor solare în timp [8].

Protecția împotriva intruziunii umidității

Umiditatea poate pătrunde prin etanșări compromise sau defecte, cauzând coroziunea contactelor metalice și a conectoarelor [5]. Acest proces accelerează degradarea celulelor solare și poate duce la eșecul total al panoului. Tehnicile de laminare în vid asigură o etanșare completă, prevenind intruziunea umidității în interiorul panoului. În plus, materialele folosite trebuie să reziste la variații extreme de temperatură, evitând astfel fisurarea sau deteriorarea structurii.

Materiale și tehnici de fabricare recomandate

Procesul de laminare în vid implică aplicarea unui strat uniform de adeziv pe sticlă, urmată de scufundarea celulelor interconectate într-o cantitate suplimentară de material [3]. Acest pas asigură o adeziune puternică între toate straturile componente, creând o barieră eficientă împotriva factorilor de mediu. În România, unde condițiile climatice sunt variabile, alegerea unui material de înaltă calitate și a unei tehnologii de laminare eficiente este esențială pentru o durată de viață a panoului solar de peste 25 de ani.

Comparativ: Materiale de encapsulare pentru panouri solare

Material Rezistență la UV Rezistență la umiditate Durată de viață estimată [1] [3] [8]
EVA Medie Bună 20–25 ani
Tedlar® Foarte bună Excelentă 30+ ani
Silicone gel Foarte bună Excelentă 30+ ani

Note: Tedlar® și gelurile de silicon sunt recomandate în mediile cu umiditate ridicată și variații termice extreme.

Concluzii cheie

  • Laminarea în vid este esențială pentru prevenirea umidității și delaminării în panourile solare policristaline din România [3].
  • Materialele rezistente la UV, cum ar fi Tedlar® sau geluri de silicon, oferă protecție îndelungată împotriva degradării [8].
  • Etanșarea completă și o adeziune uniformă între straturi reduc riscul de coroziune și degradare termică [5].
  • Alegerea corectă a materialelor și a tehnologiei de laminare influențează direct durata de viață a panoului solar.

References

  • [1] US8847063B2 – Encapsulation of solar cells – Google Patents — patent
    source passage

    delamination process results in several negative effects on cell efficiency; such as it causes water accumulation in the encapsulant ultimately resulting in cell corrosion. These laminates also have a low UV resistance and as such discolour, generally turning yellow or brown over the lifetime of a solar cell, leading to a non-aesthetically pleasing module. Classically, a substantial amount of adhesive may often be required to reduce delamination effects and UV screens need to be incorporated in the module to decrease long-term discolouration. For wafer type solar modules e.g. crystalline silicon wafer modules, one of the main problems is the cost of the materials used; for example, the substrate material is generally expensive. There are two widely used substrate materials, both of which tend to be expensive: EVA laminate and Tedlar®, referred to above, a polyvinyl fluoride (PVF) and the other widely used substrate material is glass in glass/cell/glass configuration. It is also known that the cost of the encapsulant and the substrate materials, when required, represent a substantial fraction of the overall cost of each cell and/or module. There is therefore a long felt need to reduce the costs of encapsulating solar cells in order to reduce the overall cost of their manufacture. The inventors have identified that the overall cost per solar cell module may be reduced by the use of one or more liquid silicone encapsulants enabling the utilisation of a continuous encapsulation p

  • [3] US8847063B2 – Encapsulation of solar cells – Google Patents — patent
    source passage

    oven or an in-place heating, preferably a continuous oven. Alternatively for wafer based solar cell systems a sufficient amount of encapsulant or if used adhesive is sprayed, coated or dispensed uniformly onto a glass superstrate/substrate and then the interconnecting solar cells are carefully immersed into a further amount of the same material and subsequently the resulting module is cured and hardened either thermally or by infrared radiation and where required a top-coat of encapsulant is sprayed, coated or dispensed (as described above) uniformly onto the cured adhesive and subsequently is cured and hardened either thermally or by infrared radiation as described above. In one aspect of the present invention, the frame or edge sealing material may be applied to the substrate/superstrate before encapsulation and not after completion of the encapsulation process via the laminating processes of the prior art. This forms a guide for where the encapsulant and/or adhesive needs to be applied in liquid form. Preferably the application of both encapsulant and adhesive may be carried out at about room temperature but some heating may be utilised up to e.g. a temperature of 75° C., preferably no greater than 50° C. in order to reduce the viscosity of the encapsulant or adhesive being applied on to the module. Preferably, the electrical leads in a module are treated using either of the above suggested methods are protected against coating with encapsulant and/or if used adhesive. The

  • [5] Off-Grid Solar A Bright Spot in the Global Energy Transition — book
    source passage

    can break down the protective layers of a solar panel, potentially leading to issues such as delamination or yellowing. 2. Temperature Fluctuations: Extreme temperature changes, especially rapid fluctuations, can cause solar panel materials to expand and contract. Over time, this constant change can lead to micro-cracks in the cells or damage to the solder bonds. 3. Moisture: If water infiltrates the panel due to a compromised seal or a defect, it can lead to corrosion of the metal contacts and connectors. Moisture intrusion can also cause the solar cells themselves to degrade at an accelerated rate. 4. Physical Stress: Events like hailstorms, wind-blown debris, or even the weight of snow can cause physical damage to panels. Such physical stressors can create micro-cracks or even break cells, leading to reduced efficiency. Detecting Panel Degradation Visual Inspection: One of the first signs of panel degradation is often visible damage. Discoloration, yellowing, or fogging within the panel can be signs of UV or moisture damage. Physical deformities like warping, delamination, or visible cracks are also indicative of degradation. Performance Monitoring: By consistently monitoring the energy output of a solar system, you can detect signs of degradation. If a system's output begins to decline outside of expected efficiency losses, it's an indication that one or more panels might be degrading at a faster rate. Using Electroluminescence Imaging: Professionals often use electrolumi

  • [8] EP2754186A2 – Collapsible photovoltaic module for – Google Patents — patent
    source passage

    in the relevant range of optical wavelengths (e.g. -400 nm to -1200 nm in the case of silicon), but it should also be strongly absorbing in the ultraviolet wavelength range (i.e. for wavelengths below -390 nm) in order to protect the underlying modules from UV-induced degradation. Such a sacrificial foil also provides extra protection against other types of weathering (such as that brought about by liquid water during rain) and also protects the modules from mechanical damage from for example sand storms, birds, hail or similar environmental factors. The sacrificial foil may be locally perforated or otherwise permeable to allow water, including trapped moisture, to escape. It is expected that although a sacrificial foil will need to be replaced with regular temporal intervals due to its own weathering its usage will allow the modules to constructed out of cheaper and perhaps more environmentally benign materials. Examples for such materials are PET/PETG, PVC (Polyvinyl Chloride), PC, PMMA, HDPE (High-Density PolyEthylene), LDPE (Low-Density PolyEthylene), PLA (PolyLactic Acid) or other transparent or translucent materials as frontal layer. Finally, a sacrificial foil may itself assist in the immobilization of the underlying modules; optionally in a combination with a system of guy wires and pegs in case of particularly challenging local weather conditions. It is also possible to metallize parts of the PV-module internally with for example aluminium (Al) or chromium (Cr) with

×

[1] US8847063B2 – Encapsulation of solar cells – Google Patents (patent)

delamination process results in several negative effects on cell efficiency; such as it causes water accumulation in the encapsulant ultimately resulting in cell corrosion. These laminates also have a low UV resistance and as such discolour, generally turning yellow or brown over the lifetime of a solar cell, leading to a non-aesthetically pleasing module. Classically, a substantial amount of adhesive may often be required to reduce delamination effects and UV screens need to be incorporated in the module to decrease long-term discolouration. For wafer type solar modules e.g. crystalline silicon wafer modules, one of the main problems is the cost of the materials used; for example, the substrate material is generally expensive. There are two widely used substrate materials, both of which tend to be expensive: EVA laminate and Tedlar®, referred to above, a polyvinyl fluoride (PVF) and the other widely used substrate material is glass in glass/cell/glass configuration. It is also known that the cost of the encapsulant and the substrate materials, when required, represent a substantial fraction of the overall cost of each cell and/or module. There is therefore a long felt need to reduce the costs of encapsulating solar cells in order to reduce the overall cost of their manufacture. The inventors have identified that the overall cost per solar cell module may be reduced by the use of one or more liquid silicone encapsulants enabling the utilisation of a continuous encapsulation p

×

[3] US8847063B2 – Encapsulation of solar cells – Google Patents (patent)

oven or an in-place heating, preferably a continuous oven. Alternatively for wafer based solar cell systems a sufficient amount of encapsulant or if used adhesive is sprayed, coated or dispensed uniformly onto a glass superstrate/substrate and then the interconnecting solar cells are carefully immersed into a further amount of the same material and subsequently the resulting module is cured and hardened either thermally or by infrared radiation and where required a top-coat of encapsulant is sprayed, coated or dispensed (as described above) uniformly onto the cured adhesive and subsequently is cured and hardened either thermally or by infrared radiation as described above. In one aspect of the present invention, the frame or edge sealing material may be applied to the substrate/superstrate before encapsulation and not after completion of the encapsulation process via the laminating processes of the prior art. This forms a guide for where the encapsulant and/or adhesive needs to be applied in liquid form. Preferably the application of both encapsulant and adhesive may be carried out at about room temperature but some heating may be utilised up to e.g. a temperature of 75° C., preferably no greater than 50° C. in order to reduce the viscosity of the encapsulant or adhesive being applied on to the module. Preferably, the electrical leads in a module are treated using either of the above suggested methods are protected against coating with encapsulant and/or if used adhesive. The

×

[5] Off-Grid Solar A Bright Spot in the Global Energy Transition (book)

can break down the protective layers of a solar panel, potentially leading to issues such as delamination or yellowing. 2. Temperature Fluctuations: Extreme temperature changes, especially rapid fluctuations, can cause solar panel materials to expand and contract. Over time, this constant change can lead to micro-cracks in the cells or damage to the solder bonds. 3. Moisture: If water infiltrates the panel due to a compromised seal or a defect, it can lead to corrosion of the metal contacts and connectors. Moisture intrusion can also cause the solar cells themselves to degrade at an accelerated rate. 4. Physical Stress: Events like hailstorms, wind-blown debris, or even the weight of snow can cause physical damage to panels. Such physical stressors can create micro-cracks or even break cells, leading to reduced efficiency. Detecting Panel Degradation Visual Inspection: One of the first signs of panel degradation is often visible damage. Discoloration, yellowing, or fogging within the panel can be signs of UV or moisture damage. Physical deformities like warping, delamination, or visible cracks are also indicative of degradation. Performance Monitoring: By consistently monitoring the energy output of a solar system, you can detect signs of degradation. If a system's output begins to decline outside of expected efficiency losses, it's an indication that one or more panels might be degrading at a faster rate. Using Electroluminescence Imaging: Professionals often use electrolumi

×

[8] EP2754186A2 – Collapsible photovoltaic module for – Google Patents (patent)

in the relevant range of optical wavelengths (e.g. -400 nm to -1200 nm in the case of silicon), but it should also be strongly absorbing in the ultraviolet wavelength range (i.e. for wavelengths below -390 nm) in order to protect the underlying modules from UV-induced degradation. Such a sacrificial foil also provides extra protection against other types of weathering (such as that brought about by liquid water during rain) and also protects the modules from mechanical damage from for example sand storms, birds, hail or similar environmental factors. The sacrificial foil may be locally perforated or otherwise permeable to allow water, including trapped moisture, to escape. It is expected that although a sacrificial foil will need to be replaced with regular temporal intervals due to its own weathering its usage will allow the modules to constructed out of cheaper and perhaps more environmentally benign materials. Examples for such materials are PET/PETG, PVC (Polyvinyl Chloride), PC, PMMA, HDPE (High-Density PolyEthylene), LDPE (Low-Density PolyEthylene), PLA (PolyLactic Acid) or other transparent or translucent materials as frontal layer. Finally, a sacrificial foil may itself assist in the immobilization of the underlying modules; optionally in a combination with a system of guy wires and pegs in case of particularly challenging local weather conditions. It is also possible to metallize parts of the PV-module internally with for example aluminium (Al) or chromium (Cr) with

Lasa o recenzie

Adresa ta de email nu va fi publicata. Câmpurile obligatorii sunt marcate cu *

Ne gasesti aici