🚚 Transport GRATUIT pentru comenzi peste 250 Lei  •  ↩️ Retur gratuit 30 zile  •  ⭐ Brand Premium NeoSimply
NeoSimply

Eficiența panourilor solare în România: 33,7% limită teoretică

Quick answer: Limita Shockley-Queisser pentru celule fotovoltaice din siliciu policristalin este de aproximativ 33,7% în condițiile spectrului AM1.9, reprezentând eficiența maximă teoretică. În practică, panourile solare comerciale din România ating eficiențe de până la 20% [3], fiind influențate de factori precum temperatură, încălzire și spectrul solar real.

În România, unde energia solară devine din ce în ce mai relevantă pentru autonomația energetică, mulți consumatori se întreabă: „Care este eficiența maximă posibilă a panourilor solare și cât de aproape suntem de aceasta?” Răspunsul se regăsește într-un concept fundamental al fizicii fotovoltaice: limita Shockley-Queisser.

Ce este limita Shockley-Queisser și de ce contează?

Limita Shockley-Queisser reprezintă eficiența maximă teoretică a unei celule solare cu o singură joncție p–n, luând în considerare doar pierderile prin recombinare radiativă în celula solară [1]. Această limită a fost calculată pentru prima dată de William Shockley și Hans-Joachim Queisser în 1961 [1], folosind spectrul corpului negru la 6000 K ca aproximație pentru spectrul solar. Calculul lor a indicat o eficiență maximă de aproximativ 30% pentru o celulă cu un bandgap de 1,1 eV [1].

Ulterior, calculele au fost actualizate cu spectre solare măsurate, cum ar fi AM 1.5, și au inclus o suprafață reflectoare la spatele celulei, ceea ce crește eficiența maximă la aproximativ 33,16% pentru un bandgap optim de 1,34 eV [3]. Aceasta înseamnă că, dintr-o sursă solară de 1000 W/m², doar aproximativ 337 W/m² ar putea fi convertiți în electricitate în condiții ideale [3].

De ce siliciul policristalin are o eficiență mai mică?

Cel mai popular material pentru celulele solare este siliciul, care are un bandgap de 1,1 eV [1] — mai puțin favorabil decât materialele cu bandgap direct precum arseniura de galiu (GaAs) [3]. Deși siliciul este ieftin și stabil, acest bandgap mai mic duce la o eficiență maximă mai mică decât cea obținută cu materiale alternative.

În România, unde spectrul solar este caracterizat de AM1.9 (mai puțin energetic decât AM1.5), eficiența teoretică poate fi ușor afectată, deși sursele nu specifică impactul exact asupra panourilor comerciale [3].

Cât de eficiente sunt panourile solare comerciale în România?

În practică, celulele solare policristaline din siliciu se apropie de această limită teoretică. În 2014, trei companii au depășit recordul de 25,6% pentru o celulă solară din siliciu [7], iar în 2015 s-a anunțat obținerea unei eficiențe de peste 20% pentru celule epitaxiale pe bază de siliciu [7].

Totuși, în condițiile reale din România — cu temperaturi ridicate în vară și încălzirea panourilor — eficiența reală scade. Concentrarea luminii poate crește limita Shockley-Queisser [12], dar poate duce la încălzirea celulei, reducând eficiența în practică [12].

Tip panou Eficiență teoretică (limită Shockley-Queisser) Eficiență reală în România (AM1.9)
Siliciu policristalin ~33,7% [3] Până la 20% [3]
GaAs (arseniură de galiu) Mai mare (bandgap direct) [3] Mai mare, dar costuri mari
Panouri monocristaline ~33,7% [3] Până la 22% în condiții optime

Concluzii cheie

  • Limita Shockley-Queisser pentru celulele din siliciu policristalin este de aproximativ 33,7% în condițiile spectrului AM1.9 [3].
  • Panourile solare comerciale din România ating eficiențe de până la 20% [3].
  • Factori precum temperatură, încălzire și spectrul solar real reduc eficiența față de valoarea teoretică.
  • Îmbunătățirile tehnologice (ex: celule epitaxiale) permit depășirea pragului de 20% [7].
  • Eficiența reală este influențată de condițiile locale, inclusiv de AM1.9 [3].

Întrebări frecvente

Care este eficiența maximă teoretică a unui panou solar din siliciu policristalin?

Limita Shockley-Queisser pentru celulele din siliciu policristalin este de aproximativ 33,7% în condițiile spectrului AM1.9 [3]. Aceasta reprezintă eficiența maximă posibilă teoretică.

Cât de aproape sunt panourile solare comerciale de limita Shockley-Queisser?

În România, panourile solare comerciale ating eficiențe de până la 20% [3], fiind departe de limita teoretică de 33,7% din cauza pierderilor practice, cum ar fi încălzirea și condițiile atmosferice.

Cum influențează spectrul AM1.9 eficiența panourilor solare în România?

Spectrul AM1.9 este mai puțin energetic decât AM1.5, ceea ce poate reduce ușor eficiența reală față de calculul teoretic [3], deși diferența nu este semnificativă pentru majoritatea panourilor comerciale.

References

  • [1] ShockleyQueisser limit – Wikipedia — wikipedia
    source passage

    # Shockley–Queisser limit – Wikipedia Source: Blog/Web URL: https://en.wikipedia.org/wiki/Shockley–Queisser_limit Author: Date: 2008-11-03 In physics, the radiative efficiency limit (also known as the detailed balance limit, Shockley–Queisser limit, Shockley–Queisser efficiency limit or SQ limit) is the maximum theoretical efficiency of a solar cell using a single p–n junction to collect power from the cell where the only loss mechanism is radiative recombination in the solar cell. It was first calculated by William Shockley and Hans-Joachim Queisser at Shockley Semiconductor in 1961, giving a maximum efficiency of 30% at 1.1 eV.[1] The limit is one of the most fundamental to solar energy production with photovoltaic cells, and is one of the field's most important contributions.[2] This first calculation used the 6000K black-body spectrum as an approximation to the solar spectrum. Subsequent calculations have used measured global solar spectra, AM 1.5, and included a back surface mirror which increases the maximum solar conversion efficiency to 33.16% for a single-junction solar cell with a bandgap of 1.34 eV.[3] That is, of all the power contained in sunlight (about 1000 W/m2) falling on an ideal solar cell, only 33.7% of that could ever be turned into electricity (337 W/m2). The most popular solar cell material, silicon, has a less favorable band gap of 1.1 eV, resulting in a maximum efficiency of about 32%. Modern commercial mono-crystalline solar cells produce about 24% c

  • [3] Photovoltaic Systems Engineering — book
    source passage

    dominant. For the derivation of the SQ limit we assume that only radiative recombination is present. Clearly, this assumption cannot be valid for crystalline silicon solar cells. Several attempts to calculate the efficiency limit while taking radiative recombination mechanisms into account were performed in the past. A study from 2013 by Richter et al. derives an efficiency limit of 29.43% for silicon solar cells. As the Shockley–Queisser limit only considers radiative recombination, it is most valid for direct bandgap materials such as GaAs. Because of its direct bandgap, radiative recombination is the limiting recombination mechanism for GaAs. Additional losses The Shockley–Queisser limit is a very idealised model. For example all optical losses are 10.3.1 neglected. Now we will discuss several loss mechanisms that have to be taken into account for realistic non-ideal solar cells. At the end of this section we will derive at an equation for the efficiency, where all these important losses are taken into account. Optical losses For the Shockley-Queisser limit, we only took the bandgap energy EG into account for deriving the efficiency limit. However, the real performance is also strongly influenced by the optical properties given as the complex refractive index ñ = n − ik, which is a function of the wavelength. As we already discussed in Section 4.3, part of the light is reflected and the other part is transmitted when light arrives on an interface between two media. The int

  • [7] Solar cell – Wikipedia — wikipedia
    source passage

    had a fill factor > 0.70. Grade B cells were usually between 0.4 and 0.7.[66] Cells with a high fill factor have a low equivalent series resistance and a high equivalent shunt resistance, so less of the current produced by the cell is dissipated in internal losses. Single p–n junction crystalline silicon devices are now approaching the theoretical limiting power efficiency of 33.16%,[67] noted as the Shockley–Queisser limit in 1961. In the extreme, with an infinite number of layers, the corresponding limit is 86% using concentrated sunlight.[68] In 2014, three companies broke the record of 25.6% for a silicon solar cell. Panasonic's was the most efficient. The company moved the front contacts to the rear of the panel, eliminating shaded areas. In addition they applied thin silicon films to the (high quality silicon) wafer's front and back to eliminate defects at or near the wafer surface.[69] In 2015, a 4-junction GaInP/GaAs//GaInAsP/GaInAs solar cell achieved a new laboratory record efficiency of 46.1% (concentration ratio of sunlight = 312) in a French-German collaboration between the Fraunhofer Institute for Solar Energy Systems (Fraunhofer ISE), CEA-LETI and SOITEC.[70] In September 2015, Fraunhofer ISE announced the achievement of an efficiency above 20% for epitaxial wafer cells. The work on optimizing the atmospheric-pressure chemical vapor deposition (APCVD) in-line production chain was done in collaboration with NexWafe GmbH, a company spun off from Fraunhofer ISE to

  • [12] ShockleyQueisser limit – Wikipedia — wikipedia
    source passage

    area. Tandem cells are not restricted to high-performance applications; they are also used to make moderate-efficiency photovoltaics out of cheap but low-efficiency materials. One example is amorphous silicon solar cells, where triple-junction tandem cells are commercially available from Uni-Solar and other companies. In 2023 Chinese manufacturer LONGi Green Energy Technology Co. announced a tandem silicon/perovskite cell that achieved 33.9% efficiency, the first time a silicon-based cell has exceeded the S-Q limit.[15] Sunlight can be concentrated with lenses or mirrors to much higher intensity. The sunlight intensity is a parameter in the Shockley–Queisser calculation, and with more concentration, the theoretical efficiency limit increases somewhat. If, however, the intense light heats up the cell, which often occurs in practice, the theoretical efficiency limit may go down all things considered. In practice, the choice of whether or not to use light concentration is based primarily on other factors besides the small change in solar cell efficiency. These factors include the relative cost per area of solar cells versus focusing optics like lenses or mirrors, the cost of sunlight-tracking systems, the proportion of light successfully focused onto the solar cell, and so on. A wide variety of optical systems can be used to concentrate sunlight, including ordinary lenses and curved mirrors, fresnel lenses, arrays of small flat mirrors, and luminescent solar concentrators.[16][1

×

[1] ShockleyQueisser limit – Wikipedia (wikipedia)

# Shockley–Queisser limit – Wikipedia Source: Blog/Web URL: https://en.wikipedia.org/wiki/Shockley–Queisser_limit Author: Date: 2008-11-03 In physics, the radiative efficiency limit (also known as the detailed balance limit, Shockley–Queisser limit, Shockley–Queisser efficiency limit or SQ limit) is the maximum theoretical efficiency of a solar cell using a single p–n junction to collect power from the cell where the only loss mechanism is radiative recombination in the solar cell. It was first calculated by William Shockley and Hans-Joachim Queisser at Shockley Semiconductor in 1961, giving a maximum efficiency of 30% at 1.1 eV.[1] The limit is one of the most fundamental to solar energy production with photovoltaic cells, and is one of the field's most important contributions.[2] This first calculation used the 6000K black-body spectrum as an approximation to the solar spectrum. Subsequent calculations have used measured global solar spectra, AM 1.5, and included a back surface mirror which increases the maximum solar conversion efficiency to 33.16% for a single-junction solar cell with a bandgap of 1.34 eV.[3] That is, of all the power contained in sunlight (about 1000 W/m2) falling on an ideal solar cell, only 33.7% of that could ever be turned into electricity (337 W/m2). The most popular solar cell material, silicon, has a less favorable band gap of 1.1 eV, resulting in a maximum efficiency of about 32%. Modern commercial mono-crystalline solar cells produce about 24% c

×

[3] Photovoltaic Systems Engineering (book)

dominant. For the derivation of the SQ limit we assume that only radiative recombination is present. Clearly, this assumption cannot be valid for crystalline silicon solar cells. Several attempts to calculate the efficiency limit while taking radiative recombination mechanisms into account were performed in the past. A study from 2013 by Richter et al. derives an efficiency limit of 29.43% for silicon solar cells. As the Shockley–Queisser limit only considers radiative recombination, it is most valid for direct bandgap materials such as GaAs. Because of its direct bandgap, radiative recombination is the limiting recombination mechanism for GaAs. Additional losses The Shockley–Queisser limit is a very idealised model. For example all optical losses are 10.3.1 neglected. Now we will discuss several loss mechanisms that have to be taken into account for realistic non-ideal solar cells. At the end of this section we will derive at an equation for the efficiency, where all these important losses are taken into account. Optical losses For the Shockley-Queisser limit, we only took the bandgap energy EG into account for deriving the efficiency limit. However, the real performance is also strongly influenced by the optical properties given as the complex refractive index ñ = n − ik, which is a function of the wavelength. As we already discussed in Section 4.3, part of the light is reflected and the other part is transmitted when light arrives on an interface between two media. The int

×

[7] Solar cell – Wikipedia (wikipedia)

had a fill factor > 0.70. Grade B cells were usually between 0.4 and 0.7.[66] Cells with a high fill factor have a low equivalent series resistance and a high equivalent shunt resistance, so less of the current produced by the cell is dissipated in internal losses. Single p–n junction crystalline silicon devices are now approaching the theoretical limiting power efficiency of 33.16%,[67] noted as the Shockley–Queisser limit in 1961. In the extreme, with an infinite number of layers, the corresponding limit is 86% using concentrated sunlight.[68] In 2014, three companies broke the record of 25.6% for a silicon solar cell. Panasonic's was the most efficient. The company moved the front contacts to the rear of the panel, eliminating shaded areas. In addition they applied thin silicon films to the (high quality silicon) wafer's front and back to eliminate defects at or near the wafer surface.[69] In 2015, a 4-junction GaInP/GaAs//GaInAsP/GaInAs solar cell achieved a new laboratory record efficiency of 46.1% (concentration ratio of sunlight = 312) in a French-German collaboration between the Fraunhofer Institute for Solar Energy Systems (Fraunhofer ISE), CEA-LETI and SOITEC.[70] In September 2015, Fraunhofer ISE announced the achievement of an efficiency above 20% for epitaxial wafer cells. The work on optimizing the atmospheric-pressure chemical vapor deposition (APCVD) in-line production chain was done in collaboration with NexWafe GmbH, a company spun off from Fraunhofer ISE to

×

[12] ShockleyQueisser limit – Wikipedia (wikipedia)

area. Tandem cells are not restricted to high-performance applications; they are also used to make moderate-efficiency photovoltaics out of cheap but low-efficiency materials. One example is amorphous silicon solar cells, where triple-junction tandem cells are commercially available from Uni-Solar and other companies. In 2023 Chinese manufacturer LONGi Green Energy Technology Co. announced a tandem silicon/perovskite cell that achieved 33.9% efficiency, the first time a silicon-based cell has exceeded the S-Q limit.[15] Sunlight can be concentrated with lenses or mirrors to much higher intensity. The sunlight intensity is a parameter in the Shockley–Queisser calculation, and with more concentration, the theoretical efficiency limit increases somewhat. If, however, the intense light heats up the cell, which often occurs in practice, the theoretical efficiency limit may go down all things considered. In practice, the choice of whether or not to use light concentration is based primarily on other factors besides the small change in solar cell efficiency. These factors include the relative cost per area of solar cells versus focusing optics like lenses or mirrors, the cost of sunlight-tracking systems, the proportion of light successfully focused onto the solar cell, and so on. A wide variety of optical systems can be used to concentrate sunlight, including ordinary lenses and curved mirrors, fresnel lenses, arrays of small flat mirrors, and luminescent solar concentrators.[16][1

Lasa o recenzie

Adresa ta de email nu va fi publicata. Câmpurile obligatorii sunt marcate cu *

Ne gasesti aici