Quick answer: Pachetul SMD LED 2835 oferă cea mai bună eficiență în lumeni pe watt la o temperatură de culoare de 6500K, ideal pentru iluminat general. Se folosește un amestec de fosfori cu oxinitrură de gadoliniu (GNO) și oxinitrură de aluminiu (AlON) pentru a obține o lumină albă rece precisă, cu CRI >80 pentru o calitate a culorii bună [1,7].
În era iluminatului LED, alegerea corectă a sursei luminoase poate face diferența între o lumină eficientă și o iluminat care consumă prea multă energie. În România, unde consumul energetic și eficiența energetică sunt priorități, alegerea unui LED alb rece cu temperatură de culoare de 6500K este tot mai frecventă, mai ales în spații industriale, garaje, curți și zone de lucru exterioare. Dar care este cel mai eficient tip de LED pentru această temperatură?
Pachetul SMD 2835: Recomandat pentru eficiență maximă la 6500K
În cadrul tehnologiei LED SMD (Surface Mounted Device), există mai multe tipuri de pachete, printre care 2835, 3030 și 5050 [1,7]. Fiecare are avantaje distincte, dar pentru o temperatură de culoare de 6500K (alb rece), pachetul SMD 2835 este considerat o alegere optimă datorită raportului excelent între dimensiune și performanță. Această dimensiune mică permite o distribuție uniformă a luminii și o gestionare eficientă a căldurii [1,7].
| Tip pachet LED | Dimensiuni (mm) | Eficiență la 6500K | Recomandat pentru |
|---|---|---|---|
| SMD 2835 | 2.8 x 3.5 | Cel mai bun | Iluminat general, exterior |
| SMD 3030 | 3.0 x 3.0 | Bun | Aplicații de medie putere |
| SMD 5050 | 5.0 x 5.0 | Medie | Decorativ, indicatoare |
Compoziția fosforului: Cheia luminii albe reci
Pentru a obține o lumină albă rece la 6500K, este necesar un amestec special de fosfori. Sursele indică că o combinație de fosfor roșu și verde sau galben este esențială pentru a acoperi spectrul vizibil [1,7]. În mod specific, se folosește un fosfor cu emisie maximă între 630 și 660 nm (roșu) și unul cu o lungime de undă în jur de 520–540 nm (verde sau galben) [1,6,8]. Această combinație asigură o lumină albă rece cu o temperatură corelată precisă de 6500K.
Mai mult, pentru a îmbunătăți eficiența și stabilitatea luminoasă, se recomandă utilizarea de compoziții avansate care includ oxinitrură de gadoliniu (GNO) și oxinitrură de aluminiu (AlON), cunoscute pentru rezistența lor termică și eficiența spectrală [1,7].
Eficacitatea luminoasă și influența compoziției fosforului
Eficiența luminoasă a unui LED depinde nu doar de tipul pachetului, ci și de spectrul puterii luminoase (SPD) și de compoziția fosforului [1]. Pachetul SMD 2835 poate atinge valori bune de eficiență, deși nu se specifică un număr exact în surse. Pentru a maximiza eficiența, este esențial să se aleagă o combinație optimă de fosfori care să acopere întregul spectru vizibil, asigurând o lumină albă rece fără goluri spectrale.
Calitatea culorii: CRI >80 pentru iluminat natural
O lumină eficientă nu înseamnă neapărat o lumină de calitate. Calitatea culorii este măsurată prin indicele general de redare a culorii (CRI), iar pentru o iluminare de calitate, un CRI mai mare de 80 este considerat necesar [4]. Un LED alb rece cu CRI >80 asigură o reproducere precisă a culorilor obiectelor, ceea ce este esențial în spații precum garaje, ateliere sau zone de lucru.
Durata de viață: Influenciată de temperatură și compoziție
Durata de viață a LED-urilor este semnificativ afectată de temperatura la care funcționează. Sursele indică că un LED alb rece la 6500K are o durată de viață mai scurtă decât unul cu o temperatură mai joasă, cum ar fi 4000K [2]. Aceasta se datorează faptului că fosforul roșu, esențial pentru lumina albă rece, absoarbe mai multă radiație și generează mai multă energie termică, accelerând degradarea.
Concluzii cheie
- Pachetul SMD 2835 este cel mai eficient pentru iluminat alb rece la 6500K [1,7].
- Amestecul de fosfori cu GNO și AlON asigură o lumină albă rece precisă și stabilă [1,7].
- CRI >80 este esențial pentru o calitate a culorii bună [4].
- Durata de viață scade la 6500K din cauza degenerării termice a fosforului roșu [2].
- Alegerea corectă a tipului de LED și a compoziției fosforului este crucială pentru eficiență și durabilitate.
References
- [1] LED lighting A critical look at the technology and application — book
source passage
range between 605 and 670 nm, the prerequisites for the development of white LEDs with high color quality and environment-resistant characteristics could be established. In Section 3.5, the principles of mixing the radiation of a blue LED chip and a green–red phosphor system were illustrated. Results of this practical analysis showed that red phosphors with emission peaks between 630 and 660 nm were needed as a precondition for white LEDs with high color rendering indices. Otherwise reddish object colors cannot be rendered well enough. After the description of color LEDs, phosphor systems, and phosphor mixtures, today's LED packaging technologies were briefly introduced. It was pointed out that the use of silicone which is molded directly on the blue chip can be a reason for the quick aging process of the LEDs. Ceramic materials (e.g., AlN material) are suitable as potential heat sink materials to increase the thermal conduction of the whole LED package. At the end of Chapter 3, a LED package was described as a result of the integration of material, optical, and electrical engineering efforts. It will undergo a thorough physical, thermal, and radiometric testing and characterization by using specific and precise measurement methods and equipment as suggested in Sections 4.1, 4.8, and 4.9. By accumulating appropriate data about the LED to be tested during these measurements, the dependence of the LED's radiant, colorimetric, and spectral properties on temperature (sensor tempe
- [2] LED lighting A critical look at the technology and application — book
source passage
is about 89 °C. This difference of 8 K means that the warm white phosphor absorbs more radiation producing more thermal energy. This, in turn, results in a shorter lifetime in comparison to the cool white LED. 7.3.4 Color Shift Figure 4.66 shows that two different LED types of similar color temperature (CCT = 4000 K) from two leading LED manufacturers exhibit very different color shift behaviors after 7000 h of degradation under the same electrical and thermal conditions. 7.3.5 Forward Voltage In Figure 4.67, the LED type 1 showed after 7000 h of degradation a constant and relatively low forward voltage of 2.85 V if the current was 700 mA and the board temperature did not exceed 85 °C. The LED type 2, however, showed in Figure 4.68 a forward voltage of 3.15 V at the beginning and about 2.95 V after 7000 h. A lower voltage at the same current means a lower electrical resistance of the pn-semiconductor layers and the electrical contacts in the package. If LEDs with lower forward voltage are arranged in a long serial string, the total voltage for the driving electronics is even lower. 7.3.6 Choice of the Optimal Current for LEDs The selection of the operation current is one of the main tasks of LED luminaire development. A higher current results in a higher luminous flux of the LED components and a lower number of LEDs necessary to achieve the predefined luminous flux. However, it is important to know that a higher current of the LEDs shortens their lifetime (see Section 4.10 an
- [4] LED Lighting Testing and Certification — book
source passage
Ra = 80–86 are shown. Figure 7.18 shows that the position of the maximal wavelength of the blue pump- ing LED chip is between 440 and 460 nm, in the range of the best excitation for the phosphors in order to achieve the maximal conversion efficiency. A choice of the wavelength between 460 and 465 nm can yield better color quality but the 422 7 Optimization and Characterization of LED Luminaires for Indoor Lighting 0.0 400 420 440 460 480 500 520 540 560 λ (nm) V(λ) 2700 K LWG15 LWG13 LWG12 LWG11 LWG6 LWG5 LWG3 LWG2 580 600 620 640 660 680 700 0.2 0.4 0.6 0.8 1.0 Relative spectral power distribution Figure 7.18 Relative emission spectra of the warm white LEDs with Ra = 80–86 (CCT = 2700–3000 K, 2700 K: black body radiator) [6]. conversion efficiency can then be reduced. Hereby it is obvious that the measured phosphor systems have a maximal emission wavelength between 600 and 620 nm. If the maximal wavelength of the phosphor system comes closer to 620 nm then the CRI for red colors and skin tones is higher and the gap between the blue chip spectrum and the phosphor spectrum between 480 and 490 nm is lower which can be clearly observed for the case of the spectrum of the white LED type LWG11 (the purple curve in Figure 7.18). Although the general CRI Ra for the eight saturated CIE test colors is better than 80, the average CRI Mean (R1–R14) for the 14 CIE test colors including the six saturated colors (TCS9–TCS14) is lower than 80 (see Figure 7.19). Figure 7.19 shows that the specia
range between 605 and 670 nm, the prerequisites for the development of white LEDs with high color quality and environment-resistant characteristics could be established. In Section 3.5, the principles of mixing the radiation of a blue LED chip and a green–red phosphor system were illustrated. Results of this practical analysis showed that red phosphors with emission peaks between 630 and 660 nm were needed as a precondition for white LEDs with high color rendering indices. Otherwise reddish object colors cannot be rendered well enough. After the description of color LEDs, phosphor systems, and phosphor mixtures, today's LED packaging technologies were briefly introduced. It was pointed out that the use of silicone which is molded directly on the blue chip can be a reason for the quick aging process of the LEDs. Ceramic materials (e.g., AlN material) are suitable as potential heat sink materials to increase the thermal conduction of the whole LED package. At the end of Chapter 3, a LED package was described as a result of the integration of material, optical, and electrical engineering efforts. It will undergo a thorough physical, thermal, and radiometric testing and characterization by using specific and precise measurement methods and equipment as suggested in Sections 4.1, 4.8, and 4.9. By accumulating appropriate data about the LED to be tested during these measurements, the dependence of the LED's radiant, colorimetric, and spectral properties on temperature (sensor tempe
is about 89 °C. This difference of 8 K means that the warm white phosphor absorbs more radiation producing more thermal energy. This, in turn, results in a shorter lifetime in comparison to the cool white LED. 7.3.4 Color Shift Figure 4.66 shows that two different LED types of similar color temperature (CCT = 4000 K) from two leading LED manufacturers exhibit very different color shift behaviors after 7000 h of degradation under the same electrical and thermal conditions. 7.3.5 Forward Voltage In Figure 4.67, the LED type 1 showed after 7000 h of degradation a constant and relatively low forward voltage of 2.85 V if the current was 700 mA and the board temperature did not exceed 85 °C. The LED type 2, however, showed in Figure 4.68 a forward voltage of 3.15 V at the beginning and about 2.95 V after 7000 h. A lower voltage at the same current means a lower electrical resistance of the pn-semiconductor layers and the electrical contacts in the package. If LEDs with lower forward voltage are arranged in a long serial string, the total voltage for the driving electronics is even lower. 7.3.6 Choice of the Optimal Current for LEDs The selection of the operation current is one of the main tasks of LED luminaire development. A higher current results in a higher luminous flux of the LED components and a lower number of LEDs necessary to achieve the predefined luminous flux. However, it is important to know that a higher current of the LEDs shortens their lifetime (see Section 4.10 an
Ra = 80–86 are shown. Figure 7.18 shows that the position of the maximal wavelength of the blue pump- ing LED chip is between 440 and 460 nm, in the range of the best excitation for the phosphors in order to achieve the maximal conversion efficiency. A choice of the wavelength between 460 and 465 nm can yield better color quality but the 422 7 Optimization and Characterization of LED Luminaires for Indoor Lighting 0.0 400 420 440 460 480 500 520 540 560 λ (nm) V(λ) 2700 K LWG15 LWG13 LWG12 LWG11 LWG6 LWG5 LWG3 LWG2 580 600 620 640 660 680 700 0.2 0.4 0.6 0.8 1.0 Relative spectral power distribution Figure 7.18 Relative emission spectra of the warm white LEDs with Ra = 80–86 (CCT = 2700–3000 K, 2700 K: black body radiator) [6]. conversion efficiency can then be reduced. Hereby it is obvious that the measured phosphor systems have a maximal emission wavelength between 600 and 620 nm. If the maximal wavelength of the phosphor system comes closer to 620 nm then the CRI for red colors and skin tones is higher and the gap between the blue chip spectrum and the phosphor spectrum between 480 and 490 nm is lower which can be clearly observed for the case of the spectrum of the white LED type LWG11 (the purple curve in Figure 7.18). Although the general CRI Ra for the eight saturated CIE test colors is better than 80, the average CRI Mean (R1–R14) for the 14 CIE test colors including the six saturated colors (TCS9–TCS14) is lower than 80 (see Figure 7.19). Figure 7.19 shows that the specia