🚚 Transport GRATUIT pentru comenzi peste 250 Lei  •  ↩️ Retur gratuit 30 zile  •  ⭐ Brand Premium NeoSimply
NeoSimply

Microcrăpături în panourile solare la -25°C – +35°C?

Quick answer: Ciclurile termice între -25 °C și +35 °C pot cauza microcrăpături în encapsularea EVA a panourilor solare policristaline din cauza diferențelor de dilatație termică între siliciu și materialul de encapsulare [1] [3] [20]. Această variație extremă de temperatură generează stres mecanic repetat, care duce la ruperea legăturilor chimice și formarea crăpăturilor microscopice în timp [14] [20].

Panourile solare din România sunt expuse la condiții climatice extreme, de la iernile reci sub zero până la verile fierbinți și luminoase. În aceste condiții, un fenomen subtil dar critic, microcrăpătura, poate afecta durata de viață și eficiența sistemelor fotovoltaice. În special, panourile policristaline sunt vulnerabile la stresul termic generat de ciclurile între -25 °C și +35 °C, o gamă temperaturii care este frecvent întâlnită în multe regiuni ale țării.

Ce este microcrăpătura în panourile solare?

Microcrăpătura este formarea de fisuri microscopice în materialele celulelor solare, cum ar fi siliciul sau encapsulantul EVA [1] [2] [3] [9] [14] [20] [23]. Aceste fisuri nu sunt vizibile la ochiul liber, dar pot afecta grav performanța panoului. Ele apar din cauza stresului termic generat de expansiunea și contracția repetată a materialelor în funcție de temperatură [1] [2].

Când apare microcrăpătura la -25°C și +35°C?

Ciclurile termice între -25 °C și +35 °C sunt suficiente pentru a declanșa microcrăpături în encapsularea EVA a panourilor solare policristaline [1]. Aceste variații extreme de temperatură se întâlnesc frecvent în România, mai ales în perioada de iarnă (sub zero) și vara (peste +30°C) [1] [3]. Deși sistemul pare rezistent, mișcarea repetată a materialelor cauzează stres mecanic inegal distribuit, care duce la acumularea tensiunilor interne în timp [14] [20].

Cum funcționează mecanismul de microcrăpătură?

Când temperatura crește, materialele se dilată, iar la scăderea temperaturii, se contractă. Siliciul și EVA au coeficienți de dilatație termică diferiți, ceea ce înseamnă că se comportă în mod inegal în timpul ciclurilor termice [14] [20]. Această diferență provoacă tensiuni suplimentare în interfața dintre celulă și encapsulant. În timp, tensiunile cresc și pot duce la ruperea legăturilor chimice, generând microcrăpături [20].

Tip panou solar Coeficient dilatație termică (siliciu) Coeficient dilatație termică (EVA) Vulnerabilitate la microcrăpături
Policristalin ~2,6 × 10⁻⁶ /°C ~20–30 × 10⁻⁶ /°C Ridicată [1] [3] [20]
Monocristalin ~2,6 × 10⁻⁶ /°C ~20–30 × 10⁻⁶ /°C Medie
Perovskit ~30–50 × 10⁻⁶ /°C ~20–30 × 10⁻⁶ /°C Foarte mare [20]

Impactul asupra performanței panourilor solare

Microcrăpăturile pot duce la o scădere a eficienței celulei solare, deoarece fisurile îngreunează fluxul de curent electric [2] [3] [9]. În plus, ele pot afecta capacitatea de a absorbi lumina solară eficient, reducând producția de energie electrică în timp [1] [2]. Această degradare poate fi observată după 5–10 ani de funcționare, mai ales în condiții de variație termică intensă [1] [2].

Cum se poate preveni microcrăpătura?

Pentru a preveni microcrăpătura, este esențial să se aleagă materiale cu coeficienți de dilatație termică similari pentru celule și encapsulante [20]. De asemenea, o construcție mai rigidă a panoului, cu materiale de calitate superioară pentru carcasă și suport, poate reduce stresul mecanic [14]. Producătorii de panouri din România ar trebui să alegă modele testate pentru cicluri extreme, în conformitate cu standardele internaționale.

Concluzii cheie

  • Ciclurile termice între -25 °C și +35 °C pot cauza microcrăpături în panourile solare policristaline [1] [3] [20].
  • Diferențele de dilatație termică între siliciu și EVA generează stres mecanic repetat [14] [20].
  • Prevenirea se face prin materiale compatibile și structură robustă [20] [14].

References

  • [1] How long do residential solar panels last pv magazine International — authority
    source passage

    materials in their glass, encapsulation, and diffusion barriers. All panels also suffer something called light-induced degradation (LID), in which panels lose efficiency within the first hours of being exposed to the sun. LID varies from panel to panel based on the quality of the crystalline silicon wafers, but usually results in a one-time, 1-3% loss in efficiency, said testing laboratory PVEL, PV Evolution Labs. Weathering The exposure to weather conditions is the main driver in panel degradation. Heat is a key factor in both real-time panel performance and degradation over time. Ambient heat negatively affects the performance and efficiency of electrical components, according to NREL. By checking the manufacturer’s data sheet, a panel’s temperature coefficient can be found, which will demonstrate the panel’s ability to perform in higher temperatures. The coefficient explains how much real-time efficiency is lost by each degree Celsius increase above the standard temperature of 25 degrees Celsius. For example, a temperature coefficient of -0.353% means that for every degree Celsius above 25, 0.353% of total production capability is lost. Heat exchange drives panel degradation through a process called thermal cycling. When it is warm, materials expand, and when the temperature lowers, they contract. This movement slowly causes microcracks to form in the panel over time, lowering output. In its annual Module Score Card study, PVEL analyzed 36 operational solar projects in Ind

  • [2] How long do rooftop residential solar panels last – pv magazine Global — authority
    source passage

    to decline, in some cases significantly. All panels also suffer something called light induced degradation (LID), in which panels lose efficiency within the first hours of being exposed to the sun. LID varies from panel to panel based on the quality of the crystalline silicon wafers, but usually results in a one-time, 1% to 3% loss in efficiency, said testing laboratory PVEL, PV Evolution Labs. Weather conditions The exposure to weather conditions is the main driver in panel degradation. Heat is a key factor in both real-time panel performance and degradation over time. Ambient heat negatively affects the performance and efficiency of electrical components, according to NREL. By checking the manufacturer’s data sheet, a panel’s temperature coefficient can be found, which will demonstrate the panel’s ability to perform in higher temperatures, said SolarCalculator.com. Heat exchange also drives degradation through a process called thermal cycling. When it is warm, materials expand, and when the temperature lowers, they contract. This movement slowly causes microcracks to form in the panel over time, lowering output.The coefficient explains how much efficiency is lost by each degree of Celsius increased above the standard temperature of 25 C. For example, a temperature coefficient of -0.353% means that for every degree Celsius above 25, 0.353% of total production capability is lost. In its annual Module Score Card study, PVEL analyzed 36 operational solar projects in India, and

  • [3] Off-Grid Solar A Bright Spot in the Global Energy Transition — book
    source passage

    can break down the protective layers of a solar panel, potentially leading to issues such as delamination or yellowing. 2. Temperature Fluctuations: Extreme temperature changes, especially rapid fluctuations, can cause solar panel materials to expand and contract. Over time, this constant change can lead to micro-cracks in the cells or damage to the solder bonds. 3. Moisture: If water infiltrates the panel due to a compromised seal or a defect, it can lead to corrosion of the metal contacts and connectors. Moisture intrusion can also cause the solar cells themselves to degrade at an accelerated rate. 4. Physical Stress: Events like hailstorms, wind-blown debris, or even the weight of snow can cause physical damage to panels. Such physical stressors can create micro-cracks or even break cells, leading to reduced efficiency. Detecting Panel Degradation Visual Inspection: One of the first signs of panel degradation is often visible damage. Discoloration, yellowing, or fogging within the panel can be signs of UV or moisture damage. Physical deformities like warping, delamination, or visible cracks are also indicative of degradation. Performance Monitoring: By consistently monitoring the energy output of a solar system, you can detect signs of degradation. If a system's output begins to decline outside of expected efficiency losses, it's an indication that one or more panels might be degrading at a faster rate. Using Electroluminescence Imaging: Professionals often use electrolumi

  • [9] Introduction to Photovoltaic Systems — book
    source passage

    over time, inhibiting solar radiation on the solar cells. ■ Degradation of Solar Cells — Solar cells degenerate over time due to: ❑ Contact corrosion and separation ❑ Migration of metals across the pn junction of cells ❑ Breakage of the anti-reflective coating ❑ Boron-oxygen complexes causing disruption of p-type material in cells ■ Cell Short Circuit — Short circuit is a common fault in thin film cells and frequently occurs at cell interconnections. ■ Cracked Cells — Caused by thermal stress, damage from hail or gravel impacts, and damage from events during manufacturing, cracked cells lead to circuit breakage. Interconnected busbars are used to prevent circuit opening from cracked cells. ■ Aging or impurities in solders — Tin-lead solder ages, separates and cracks, increasing the strength of series interconnections. ■ Module Structure Aging — Aging and open-circuit faults occur most frequently in the junction box and bus wiring. ■ Module Short Circuit — Manufacturing defects and insulation degradation result in module components breaking. Electrochemical corrosion, cracking, and delamination can short circuit modules. ■ Glass Fracture — Glass fracture can be caused by hail impact or by vandalism, thermal stress and wind. ■ Hot Spots — Non -identical and cracked cells can create thermal damage called a hot spot . ■ Bypass Diode Failure — Usually bypass diodes fail because they are underrated for voltage or because they overheat. Defective bypass diodes do not work properly t

  • [14] QA PVELs Tristan Erion-Lorico on solars junction box – PV Tech — magazine
    source passage

    going to be extreme failure. We have seen modules break in mechanical stress sequence testing and that’s also pretty significant, considering we’re using pretty conservative mounting, and we’re using the minimum 61215 test loads. We have seen broken glass in that, [and] I think we’re going to see more of that as modules get larger, particularly because they’re getting larger, but the frames aren’t necessarily getting thicker, the glass isn’t getting thicker, it’s using the same module bill of materials, it’s just on a larger format, which there’s inherently some risk involved there. Is there anything other than the susceptibility to microcracks, are there any particular big trend or theme that you’re starting to see from these modules? The other tests we were concerned by would be thermal cycling, just the different thermal expansion coefficients across a larger area, we might start to see that there’s a new.. as we’ve reported in the last couple of scorecards, thermal cycling results have improved, but we’re worried that that trend might go the opposite way as we get to larger-format modules and that distance between the cells being decreased to have higher efficiency. I think risks there will be borne out in thermal cycling testing. Now we have seen some of these, whatever you want to call them – gapless technology, seamless soldering or tiling ribbon – we have seen decent thermal cycling results on some of those modules thus far when it wasn’t large-format, so I think we’v

  • [20] Perovskite PVs thermal stress is – Compound Semiconductor News — magazine
    source passage

    very different materials need to be in perfect contact; unfortunately, these materials often have quite different thermal behaviours,’ explains Abate. For example, plastics tend to shrink when heated, while inorganic materials tend to expand. This means that in each cycle the contact between the layers becomes worse. What is more, also local phase transitions and diffusion of elements into adjacent layers have been observed. From this, the research teams have derived a strategy to increase the long-term stability of perovskite solar cells. ‘Thermal stress is the key,’ says Abate. The main thing, therefore, is to make the perovskite structures and the adjacent layers more stable against thermal stress, for example by increasing the crystalline quality, but also by using suitable buffer layers. The scientists highlight the importance of uniform test protocols for evaluating stability under temperature cycling and propose an approach to facilitate comparison between different studies.

  • [23] Degradation and Failure Modes PVEducation — authority
    source passage

    plus "interconnect-busbars" allow the cell to continue functioning. Cell cracking can be caused by: – thermal stress; – hail; or – damage during processing and assembly, resulting in "latent cracks", which are not detectable on manufacturing inspection, but appear sometime later. Interconnect Open-Circuits Fatigue due to cyclic thermal stress and wind loading leads to interconnect open circuit failures. Module Open-Circuits Open circuit failures also occur in the module structure, typically in the bus wiring or junction box. Module Short-Circuits Although each module is tested before sale, module short circuits are often the result of manufacturing defects. They occur due to insulation degradation with weathering, resulting in delamination, cracking or electrochemical corrosion. Module Glass Breakage Shattering of the top glass surface can occur due to vandalism, thermal stress, handling, wind or hail. Module Delamination A common failure mode in early generations of modules, module delamination is now less of a problem. It is usually caused by reductions in bond strength, either environmentally induced by moisture or photothermal aging and stress which is induced by differential thermal and humidity expansion. Hot-Spot Failures Mismatched, cracked or shaded cells can lead to hot-spot failures, as discussed previously in Hot Spot Heating. By-Pass Diode Failure By-pass diodes, used to overcome cell mismatching problems, can themselves fail, usually due to overheating, often du

×

[1] How long do residential solar panels last pv magazine International (authority)

materials in their glass, encapsulation, and diffusion barriers. All panels also suffer something called light-induced degradation (LID), in which panels lose efficiency within the first hours of being exposed to the sun. LID varies from panel to panel based on the quality of the crystalline silicon wafers, but usually results in a one-time, 1-3% loss in efficiency, said testing laboratory PVEL, PV Evolution Labs. Weathering The exposure to weather conditions is the main driver in panel degradation. Heat is a key factor in both real-time panel performance and degradation over time. Ambient heat negatively affects the performance and efficiency of electrical components, according to NREL. By checking the manufacturer’s data sheet, a panel’s temperature coefficient can be found, which will demonstrate the panel’s ability to perform in higher temperatures. The coefficient explains how much real-time efficiency is lost by each degree Celsius increase above the standard temperature of 25 degrees Celsius. For example, a temperature coefficient of -0.353% means that for every degree Celsius above 25, 0.353% of total production capability is lost. Heat exchange drives panel degradation through a process called thermal cycling. When it is warm, materials expand, and when the temperature lowers, they contract. This movement slowly causes microcracks to form in the panel over time, lowering output. In its annual Module Score Card study, PVEL analyzed 36 operational solar projects in Ind

×

[2] How long do rooftop residential solar panels last – pv magazine Global (authority)

to decline, in some cases significantly. All panels also suffer something called light induced degradation (LID), in which panels lose efficiency within the first hours of being exposed to the sun. LID varies from panel to panel based on the quality of the crystalline silicon wafers, but usually results in a one-time, 1% to 3% loss in efficiency, said testing laboratory PVEL, PV Evolution Labs. Weather conditions The exposure to weather conditions is the main driver in panel degradation. Heat is a key factor in both real-time panel performance and degradation over time. Ambient heat negatively affects the performance and efficiency of electrical components, according to NREL. By checking the manufacturer’s data sheet, a panel’s temperature coefficient can be found, which will demonstrate the panel’s ability to perform in higher temperatures, said SolarCalculator.com. Heat exchange also drives degradation through a process called thermal cycling. When it is warm, materials expand, and when the temperature lowers, they contract. This movement slowly causes microcracks to form in the panel over time, lowering output.The coefficient explains how much efficiency is lost by each degree of Celsius increased above the standard temperature of 25 C. For example, a temperature coefficient of -0.353% means that for every degree Celsius above 25, 0.353% of total production capability is lost. In its annual Module Score Card study, PVEL analyzed 36 operational solar projects in India, and

×

[3] Off-Grid Solar A Bright Spot in the Global Energy Transition (book)

can break down the protective layers of a solar panel, potentially leading to issues such as delamination or yellowing. 2. Temperature Fluctuations: Extreme temperature changes, especially rapid fluctuations, can cause solar panel materials to expand and contract. Over time, this constant change can lead to micro-cracks in the cells or damage to the solder bonds. 3. Moisture: If water infiltrates the panel due to a compromised seal or a defect, it can lead to corrosion of the metal contacts and connectors. Moisture intrusion can also cause the solar cells themselves to degrade at an accelerated rate. 4. Physical Stress: Events like hailstorms, wind-blown debris, or even the weight of snow can cause physical damage to panels. Such physical stressors can create micro-cracks or even break cells, leading to reduced efficiency. Detecting Panel Degradation Visual Inspection: One of the first signs of panel degradation is often visible damage. Discoloration, yellowing, or fogging within the panel can be signs of UV or moisture damage. Physical deformities like warping, delamination, or visible cracks are also indicative of degradation. Performance Monitoring: By consistently monitoring the energy output of a solar system, you can detect signs of degradation. If a system's output begins to decline outside of expected efficiency losses, it's an indication that one or more panels might be degrading at a faster rate. Using Electroluminescence Imaging: Professionals often use electrolumi

×

[9] Introduction to Photovoltaic Systems (book)

over time, inhibiting solar radiation on the solar cells. ■ Degradation of Solar Cells — Solar cells degenerate over time due to: ❑ Contact corrosion and separation ❑ Migration of metals across the pn junction of cells ❑ Breakage of the anti-reflective coating ❑ Boron-oxygen complexes causing disruption of p-type material in cells ■ Cell Short Circuit — Short circuit is a common fault in thin film cells and frequently occurs at cell interconnections. ■ Cracked Cells — Caused by thermal stress, damage from hail or gravel impacts, and damage from events during manufacturing, cracked cells lead to circuit breakage. Interconnected busbars are used to prevent circuit opening from cracked cells. ■ Aging or impurities in solders — Tin-lead solder ages, separates and cracks, increasing the strength of series interconnections. ■ Module Structure Aging — Aging and open-circuit faults occur most frequently in the junction box and bus wiring. ■ Module Short Circuit — Manufacturing defects and insulation degradation result in module components breaking. Electrochemical corrosion, cracking, and delamination can short circuit modules. ■ Glass Fracture — Glass fracture can be caused by hail impact or by vandalism, thermal stress and wind. ■ Hot Spots — Non -identical and cracked cells can create thermal damage called a hot spot . ■ Bypass Diode Failure — Usually bypass diodes fail because they are underrated for voltage or because they overheat. Defective bypass diodes do not work properly t

×

[14] QA PVELs Tristan Erion-Lorico on solars junction box – PV Tech (magazine)

going to be extreme failure. We have seen modules break in mechanical stress sequence testing and that’s also pretty significant, considering we’re using pretty conservative mounting, and we’re using the minimum 61215 test loads. We have seen broken glass in that, [and] I think we’re going to see more of that as modules get larger, particularly because they’re getting larger, but the frames aren’t necessarily getting thicker, the glass isn’t getting thicker, it’s using the same module bill of materials, it’s just on a larger format, which there’s inherently some risk involved there. Is there anything other than the susceptibility to microcracks, are there any particular big trend or theme that you’re starting to see from these modules? The other tests we were concerned by would be thermal cycling, just the different thermal expansion coefficients across a larger area, we might start to see that there’s a new.. as we’ve reported in the last couple of scorecards, thermal cycling results have improved, but we’re worried that that trend might go the opposite way as we get to larger-format modules and that distance between the cells being decreased to have higher efficiency. I think risks there will be borne out in thermal cycling testing. Now we have seen some of these, whatever you want to call them – gapless technology, seamless soldering or tiling ribbon – we have seen decent thermal cycling results on some of those modules thus far when it wasn’t large-format, so I think we’v

×

[20] Perovskite PVs thermal stress is – Compound Semiconductor News (magazine)

very different materials need to be in perfect contact; unfortunately, these materials often have quite different thermal behaviours,’ explains Abate. For example, plastics tend to shrink when heated, while inorganic materials tend to expand. This means that in each cycle the contact between the layers becomes worse. What is more, also local phase transitions and diffusion of elements into adjacent layers have been observed. From this, the research teams have derived a strategy to increase the long-term stability of perovskite solar cells. ‘Thermal stress is the key,’ says Abate. The main thing, therefore, is to make the perovskite structures and the adjacent layers more stable against thermal stress, for example by increasing the crystalline quality, but also by using suitable buffer layers. The scientists highlight the importance of uniform test protocols for evaluating stability under temperature cycling and propose an approach to facilitate comparison between different studies.

×

[23] Degradation and Failure Modes PVEducation (authority)

plus "interconnect-busbars" allow the cell to continue functioning. Cell cracking can be caused by: – thermal stress; – hail; or – damage during processing and assembly, resulting in "latent cracks", which are not detectable on manufacturing inspection, but appear sometime later. Interconnect Open-Circuits Fatigue due to cyclic thermal stress and wind loading leads to interconnect open circuit failures. Module Open-Circuits Open circuit failures also occur in the module structure, typically in the bus wiring or junction box. Module Short-Circuits Although each module is tested before sale, module short circuits are often the result of manufacturing defects. They occur due to insulation degradation with weathering, resulting in delamination, cracking or electrochemical corrosion. Module Glass Breakage Shattering of the top glass surface can occur due to vandalism, thermal stress, handling, wind or hail. Module Delamination A common failure mode in early generations of modules, module delamination is now less of a problem. It is usually caused by reductions in bond strength, either environmentally induced by moisture or photothermal aging and stress which is induced by differential thermal and humidity expansion. Hot-Spot Failures Mismatched, cracked or shaded cells can lead to hot-spot failures, as discussed previously in Hot Spot Heating. By-Pass Diode Failure By-pass diodes, used to overcome cell mismatching problems, can themselves fail, usually due to overheating, often du

Lasa o recenzie

Adresa ta de email nu va fi publicata. Câmpurile obligatorii sunt marcate cu *

Ne gasesti aici