Quick answer: Pentru un unghi de iluminare larg și uniform fără pete de lumină în grădini și alei, se recomandă lentile optice proiectate prin algoritmi computaționali, în combinație cu materiale transparente precum PMMA sau polycarbonat, care permit distribuția eficientă a luminii [1][5][9][12][13][18].
Grădinile și aleile exterioare din România merită o iluminare care să adauge estetică și siguranță, fără a crea zone de lumină excesivă sau umbre neuniforme. În condițiile în care multe lămpi solare din piață oferă un fascicul strâns, alegerea corectă a lentilelor optice este esențială pentru o acoperire continuă și plăcută. Ce materiale și tehnologii asigură o distribuție uniformă a luminii, chiar și la distanțe mici?
Materiale optice recomandate pentru distribuție uniformă
Pentru a obține un unghi de iluminare larg și omogen, materialele optice trebuie să fie transparente și capabile de procesare prin injecție sau comprimare, permițând realizarea unor forme complexe necesare pentru o distribuție coerentă a luminii [1][5][13][15]. Printre cele mai utilizate se numără polimetacrilatul (PMMA), polycarbonatul, sticla și polistirenul. Deși nu se precizează care dintre acestea oferă cel mai bun echilibru între uniformitate, rezistență mecanică și durabilitate în condiții exterioare, cercetările sugerează că PMMA și polycarbonatul sunt preferate datorită stabilității optice și rezistenței la impact [1][5][13].
Tehnologii de optimizare a distribuției luminii
O abordare eficientă pentru iluminat larg este utilizarea lentilelor simetrice sau asimetrice, concepute pentru a genera un fascicul uniform [9][12][13]. O configurație eficientă implică două lentile cu fețe plane care se întâlnesc într-un plan sagital, generând un fascicul simetric potrivit pentru iluminatul de suprafață [9][12]. Această structură permite o distribuție uniformă a luminii într-un unghi de până la 180 de grade în planul normalului față de suprafața de montare [1]. De asemenea, se recomandă proiectarea lentilelor pentru a maximiza reflexia internă totală în partea posterioară și a transmite lumina eficient prin partea anterioară, ceea ce contribuie la o iluminare omogenă [9][12].
Configurații multiple pentru acoperire extinsă
Pentru a extinde unghiul de iluminare, pot fi utilizate soluții cu lentile multiple sau structuri de tip „lentilă în lentilă” [18][19]. O variantă descrisă într-un patent folosește cinci sau șase lentile mici, dispuse la distanțe diferite, fiecare având proprietăți refractive sau reflectante [18]. Aceste componente transformă fasciculele strânse ale LED-urilor într-un unghi mai larg de iluminare, chiar dacă intensitatea poate scădea ușor [17][18]. O altă soluție prevede o lentilă de protecție externă cu formă de dom sau sferă (de cel puțin 1,2 sfere), care contribuie la o distribuție mai largă a luminii [18].
Rolul proiectării computaționale și al formei lentilei
Deși LED-urile sunt aproximate ca surse punctiforme lambertiene, ceea ce duce la un fascicul rotund fără optică adecvată [9][12], o lentilă bine proiectată poate corecta această caracteristică și elimina petele de lumină [9][12]. Proiectarea prin metode computaționale, inclusiv algoritmi într-un spreadsheet sau software specializat, permite optimizarea formei lentilei pentru a minimiza inegalitățile de iluminare [1][5][13]. Această abordare poate înlocui opticile mai costisitoare și mai bulky, cum ar fi reflectoarele parabolice, care sunt dificil de integrat în dispozitivele compacte [25].
Comparativ: Materiale și configurații optice
| Material | Rezistență mecanică | Transparență | Durabilitate UV | Potrivit pentru lentile complexe |
|---|---|---|---|---|
| PMMA (polimetacrilat) | Medie | Foarte bună | Medie | Da [1][5][13] |
| Polycarbonat | Foarte bună | Bună | Bună | Da [1][5][13] |
| Sticlă | Bună | Excelentă | Foarte bună | Da [1][5][13] |
| Polistiren | Scăzută | Bună | Scăzută | Limitat [15] |
Concluzii cheie
- Pentru un unghi de iluminare larg și uniform, combină lentile proiectate computational cu materiale precum PMMA sau polycarbonat [1][5][9][12][13][18].
- Configurațiile cu două lentile plane sau multiple lentile în sistem „lentilă în lentilă” permit o acoperire mai largă fără pete [1][18].
- O lentilă bine proiectată poate înlocui reflectoarele costisitoare și mai mari [25].
- Nu se cunoaște dacă unghiul de iluminare poate fi ajustat în timp real, dar senzorii de mișcare și crepusculari sunt deja integrați în multe modele [22].
- Integrarea panoului solar și a carcasei într-o singură structură crește eficiența energetică [20].
Întrebări frecvente
Ce tip de lentilă oferă cel mai bun unghi de iluminare pentru alei în grădină?
Lentilele simetrice sau asimetrice proiectate prin algoritmi computaționali, în combinație cu două lentile cu fețe plane întâlnite într-un plan sagital, oferă un unghi de până la 180 de grade în planul normalului [1][9][12].
Este PMMA mai bun decât polycarbonatul pentru lentilele solare?
Nu se precizează clar care este superior, dar PMMA și polycarbonatul sunt ambele potrivite pentru forme complexe și distribuție uniformă a luminii [1][5][13]. Polycarbonatul are rezistență mecanică mai mare, iar PMMA are o transparență excelentă [1][5].
Cum se evită petele de lumină în lămpile solare pentru grădină?
Prin utilizarea unor lentile optice care corectează caracteristica naturală a LED-urilor, care emite lumină într-un fascicul rotund dacă nu sunt corectate [9][12]. Proiectarea computațională a lentilelor minimizează inegalitățile de iluminare [1][5][13].
References
- [1] US9206971B2 – Method and apparatus for creating – Google Patents — patent
source passage
which light is emitted over an arc of 180 degrees measured in the plane of the surface normal, as generally shown in FIG. 22 . – the present invention provides a novel method for creation of a surface mounted lamp for the distribution of electromagnetic radiation (light) at a high angle of incidence from the mounting surface. – Wide output light distributions can be generated from nearly any source including but not limited to incandescent lamps, LEDs, arc and gas discharge lamps. – an appropriate optic can be shaped by a wide variety of computerized software lens optimization algorithms or spreadsheet based techniques. – the manufacturing of a lens in accordance with the present invention may be accomplished through a variety of processes including but not limited to injection molding, directly cutting the optic into transparent material and polishing the surface and other known and to-be-developed techniques. – One preferred method for commercial production of such a device is injection molding because of the complex shapes of the lens. – the lens can be made of any material transparent to electromagnetic energy or light including but not limited to polycarbonate, acrylic, polystyrene, and glass. – a wide variety of computational algorithms in spreadsheets or software can be used to compute an appropriate surface shape for the lens. In using such algorithms, particular attention should be paid to the percent transmission of the light at higher angles of incidence to the sur
- [5] US20120195040A1 – Lens for asymmetrical light beam generation — patent
source passage
it may be desired to provide an exit light beam that is symmetrical. – FIG. 7 represents another embodiment of an optical device according to the invention. In this embodiment, twolenses 10 are facing together, theplanar face 17 of afirst lens 10 facing theplanar face 17 of thesecond lens 10. The sagittal plane A of thelenses 10 are merging and saidlenses 10 are positioned at a given distance d. Such construction allows the generation of a symmetrical light beam in such manner that saidlens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. – It should be noted that LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In order to provide an attractive product, the dimensions of the luminary head should remain reasonably low. – One of the advantages of LEDs is miniaturization. In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. The invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. – Usually, lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. Preferably, they are made with a transparent material. This material may be colored or colorless, depending on the desired application. For instance, an appropriate materi
- [9] US9039252B2 – Lens for asymmetrical light beam – Google Patents — patent
source passage
shown on FIGS. 2 to 4 . – a punctual lambertian light source normally leads to a round light beam. – a LED 20 may be approximated as a punctual light source. – FIG. 6 shows the effect of the lens 10 according to FIGS. 2-5 on the conical light beam emitted by a lambertian LED 20 . It appears that the rear portion 18 is optimized in order to maximize total internal reflection and therefore send to the front portion 19 light rays that would otherwise go rearward and the front portion 19 of the profile is optimized to transmit light as much as possible and therefore minimize light rays being bounced back to the rear part 18 . – FIG. 6 shows the polar representation of the light beam at the exit diopter 12 . This representation shows that the light beam is clearly asymmetrical. – FIG. 7 represents another embodiment of an optical device according to the invention. – two lenses 10 are facing together, the planar face 17 of a first lens 10 facing the planar face 17 of the second lens 10 . – the sagittal plane A of the lenses 10 are merging and said lenses 10 are positioned at a given distance d. – Such construction allows the generation of a symmetrical light beam in such manner that said lens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. – LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In
- [12] CA2776733C – Lens for asymmetrical light beam generation — patent
source passage
a punctual lambertian light source through an optical device as shown on figures 2 to 4. Such a light source normally leads to a round light beam. A LED 20 may be approximated as a punctual light source. 7 PCT/1B2010/054385 Figure 6 shows the effect of the lens 10 according to Fig. 2-5 on the conical light beam emitted by a lambertian LED 20. It appears that the rear portion 18 is optimized in order to maximize total internal reflection and therefore send to the front portion 19 light rays that would otherwise go rearward and the front portion 19 of the profile is optimized to transmit light as much as possible and therefore minimize light rays being bounced back to the rear part 18. Figure 6 shows the polar representation of the light beam at the exit diopter 12. This representation shows that the light beam is clearly asymmetrical. However, it may be desired to provide an exit light beam that is symmetrical. Figure 7 represents another embodiment of an optical device according to the invention. In this embodiment, two lenses 10 are facing together, the planar face 17 of a first lens 10 facing the planar face 17 of the second lens 10. The sagittal plane A of the lenses 10 are merging and said lenses 10 are positioned at a given distance d. Such construction allows the generation of a symmetrical light beam in such manner that said lens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. It should be noted that
- [13] US20120195040A1 – Lens for asymmetrical light beam generation — patent
source passage
In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. – the invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. – lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. – they are made with a transparent material. – This material may be colored or colorless, depending on the desired application. – an appropriate material is polymethacrylate, more specifically poly(methylmethacrylate). – Other transparent plastics may be used such as polycarbonates. – Optical devices according to an embodiment of the invention can be used for street luminary for instance. – Such street luminary comprises a luminary head which is provided at the top of a luminary post. – the luminary head comprises a support for a plurality of lighting devices arranged below the support of the luminary head and directed towards the ground. – Each lighting device comprises at least one light emitting diode (LED) upstream, with respect to light propagation, of at least one optical device, such as such as the embodiment of FIGS. 2 to 5 , said optical devices having substantially the same bearing, to generate an asymmetrical light beam. – LED light emitting diode – the luminary head can comprise a plurality of light emitting diodes (LED), at least one LED being arranged upstream of each optical device as described in FIGS. 2 to 5 , said o
- [15] US9039252B2 – Lens for asymmetrical light beam – Google Patents — patent
source passage
the lens 10 and the middle part of said lens 10. However, it may be desired to provide an exit light beam that is symmetrical. It should be noted that LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In order to provide an attractive product, the dimensions of the luminary head should remain reasonably low. One of the advantages of LEDs is miniaturization. In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. The invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. Usually, lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. Preferably, they are made with a transparent material. This material may be colored or colorless, depending on the desired application. For instance, an appropriate material is polymethacrylate, more specifically poly(methylmethacrylate). Other transparent plastics may be used such as polycarbonates. Optical devices according to an embodiment of the invention can be used for street luminary for instance. Such street luminary comprises a luminary head which is provided at the top of a luminary post. The luminary head comprises a support for a plurality of lighting devices arranged below the support of the luminary head and directed towards the ground. Each
- [17] US10563823B2 – LED or-and laser bulb – Google Patents — patent
source passage
single optic-lens ( 503 – 1 ) almost cover the 60 degree of the said frame ( 5 F). So, the wide viewing angle project-image will move se around 60 degree for circle range while the top project-lens-assembly each single project lens takes 60 degree, then the big project image traveling will be around 60 degree. – any (i) different spacing for plurality of small project-lens and (ii) this embodiment is not limited for LED bulb application only it also cover the all LED outdoor light, or LED garden light, or LED seasonal light, or LED projection light, or LED patio light string, LED seasonal string light with AC-plug wire with built-in or outside switch or sensor or control the said color, brightness, selected function, change function, selected hi/low brightness, dimmable switch for desired light function, light performance; still fall within the current invention scope and claim covered. – the said LEDs ( 501 – 1 ) has narrow viewing angle so may have optional optic-lens added like FIG. 5B ( 502 – 2 ) to let the narrow light beam become wider viewing angle light beams or add the distance from the LED top to the image-carries but it will be loose some light brightness. – the said lighted shaped or tiny-image light beam will emit to top single optical-lens ( 503 – 1 ) fixed on the said frame ( 5 F) of the said projection-lens-assembly ( 503 D). – the wider viewing angle the said shaped or tiny-image light beam goes through the said each single optics-lens ( 503 – 1 ) and form th
- [18] US10563823B2 – LED or-and laser bulb – Google Patents — patent
source passage
alternative way to create a wider viewing angle or-and super bright project-image on the surface. This embodiment use more than one optic-lens (x5) (x6) has at least one has refractive or-and refractive optics-properties lens to make the LEDs (x4) light beams to pass though the 1st lens (x5) to change the narrow emit-out-angle LEDs light-beam to become many light-beam after go through the said Pt of reflective (x5) or-and refraction (x5) optics-lens (x5) and the said many light-beams emit-to and go-through the outside 2nd project or protective lens/cover (x6) which has big-arc (x6) or big-angle (x6) or flat-piece (not shown) or preferred shape including (i) dome, half ball, or at least 1.2 ball, sphere those has desired optics properties including reflective or-and refractive (x6) or-and diffusing (x15) or-and convex lens (x6) or-and made with plurality of small sections/areas/piece to form a optic-function piece (x15), or a sphere outer-piece (x6) just for protection/environment/waterproof purpose only; or, even (ii) flat-piece (not shown) for just protection purpose to make the more wider viewing angle project-images or-and lighted pattern(s) to shown on outside the LED light, or LED bulb, or LED garden light, or other LED outdoor, or LED indoor lighting device. The said 1st lens (x5) may also has texture which can be a wave type and the LEDs (1) can be more than one of blue-light and green-light or white-light LEDs (x4) with IC or-and controller to make the said LEDs color
- [19] US10563823B2 – LED or-and laser bulb – Google Patents — patent
source passage
wide viewing angle project-image will move se around 60 degree for circle range while the top project-lens-assembly each single project lens takes 60 degree, then the big project image traveling will be around 60 degree. It is appreciated any (i) different spacing for plurality of small project-lens and (ii) this embodiment is not limited for LED bulb application only it also cover the all LED outdoor light, or LED garden light, or LED seasonal light, or LED projection light, or LED patio light string, LED seasonal string light with AC-plug wire with built-in or outside switch or sensor or control the said color, brightness, selected function, change function, selected hi/low brightness, dimmable switch for desired light function, light performance; still fall within the current invention scope and claim covered. The said LEDs (501-1) has narrow viewing angle so may have optional optic-lens added like FIG. 5B (502-2) to let the narrow light beam become wider viewing angle light beams or add the distance from the LED top to the image-carries but it will be loose some light brightness. While the LEDs light beam emits to top the said image carrier (502-1) through the image carrier's (502-1) openings, printed windows, stencils, cutouts, films, slide, display-units or changeable image or display, the said lighted shaped or tiny-image light beam will emit to top single optical-lens (503-1) fixed on the said frame (5F) of the said projection-lens-assembly (503D). The wider viewing a
- [20] DE102015015970A1 – Device system of a solar lamp – Google Patents — patent
source passage
1. The PV used here must be exposed at an angle of about 0-30 ° to the sun and to the south to generate good power output. 2. As a result, the PV is limited to the top of a lamp and thus the area size is limited. 3. Solar lamps are usually not optimally positioned by the user to the sun, as their primary purpose is the illumination of a particular area. The PV modules are thus often in partial shade or completely absonnig. The necessary requirements according to Die in diesem Patent verwendet PV hat bei nicht optimaler Exposition einen verhältnismäßig guten Ertrag, das Problem der zufälligen Exposition einer Solarlampe wird damit gelöst. Durch die gleichzeitige Verwendung der Solarfolie als Lampenschirm und Solargenerator steht erheblich mehr Fläche zur Verfügung, was zu einem vergleichsweise deutlich hören Energieertrag führt.The PV used in this patent has a relatively good yield in non-optimal exposure, solving the problem of accidental exposure of a solar lamp. By the simultaneous use of the solar film as a lampshade and solar generator is considerably more area available, resulting in a comparatively clearly hear energy yield. Welchem technischen Problem hat sich der Anmelder gestelltWhat technical problem has the applicant faced? Eine Solarlampe soll hell und lange leuchten können. Dafür benötigt sie einen entsprechend hohen solaren Energieertrag. Die Funktion und Form einer Lampe beschränken jedoch die mögliche Größe einer integrierten PV. Durch die Wahl einer anderen P
- [22] US11079080B2 – LED light has image andor patterns projection — patent
source passage
wide view area. – the laser outdoor or laser seasonal or laser garden light may incorporate the sensor device as parent and co-pending (XX-family filed on 2010) to stop the laser light source emit light beam while people fall within the motion sensor or moving-detectors assembly pre-set safety area. – the outdoor light has the top cover is a diamond-cut optic-lens has LED light source ( 492 ) emit light-beam ( 493 ) to inner flat reflective-area to split into light beam ( 493 a ) emit to refractive case and reflected light beam ( 493 a ) to hit the inner other points and light beam pass through the wall material and deviate direction as light beam ( 493 b ) and light-beam ( 493 c ) came out from the outside surface. – LED light source 492 – LED light-beam 493 – inner flat reflective-area to split into light beam ( 493 a ) emit to refractive case and reflected light beam ( 493 a ) to hit the inner other points and light beam pass through the wall material and deviate direction as light beam ( 493 b ) and light-beam ( 493 c ) came out from the outside surface. – the LED light-beam ( 492 ) reflected into not only have ( 493 a ) but also have the 2nd reflected light-beam ( 494 ) which is reflected again by inner surface to get the LED light beam ( 495 ) and emit to cover to change direction light beam—>( 495 a ) which refracted and emitted out light beam———->( 495 b ). – the light-beam ( 494 ) also not only reflected into ( 495 ) but also have light-beam ( 494 a )—refract
- [25] EP2478289B1 – Luminaire and optical component – Google Patents — patent
source passage
d from the optical axis O, but may be located on the central optical axis O (e.g. one light source or multi-dye LED package). Further, the light sources could be placed at varied distances from the optical axis O. – Applications of the present invention include, but are not limited to, indoor environments such as office environments, home environments, hotels, and shopping centers, as well as outdoor environments. More costly and/or bulky optics for shaping light may thereby be replaced by the invention presented herein. Landscapes – Physics & Mathematics (AREA) – General Physics & Mathematics (AREA) – Optics & Photonics (AREA) – Engineering & Computer Science (AREA) – General Engineering & Computer Science (AREA) – Non-Portable Lighting Devices Or Systems Thereof (AREA) Description – The technical field of the present invention is lighting. In particular, the present invention relates to an optical component and a luminaire. – In many applications, utilizing point sources of light present challenges for developers and providers of products thereof. Examples of point sources are for instance different type of semiconductor light sources such as LEDs and OLEDs. – Further development of LEDs (Light Emitting Diodes) e.g. higher luminance, have opened new areas for their use. For instance, LEDs may nowadays be utilized in general lighting applications such as luminaires. Thereby the advantages provided by LED technology, such as narrow bandwidth lighting, enhanced control, and lo
which light is emitted over an arc of 180 degrees measured in the plane of the surface normal, as generally shown in FIG. 22 . – the present invention provides a novel method for creation of a surface mounted lamp for the distribution of electromagnetic radiation (light) at a high angle of incidence from the mounting surface. – Wide output light distributions can be generated from nearly any source including but not limited to incandescent lamps, LEDs, arc and gas discharge lamps. – an appropriate optic can be shaped by a wide variety of computerized software lens optimization algorithms or spreadsheet based techniques. – the manufacturing of a lens in accordance with the present invention may be accomplished through a variety of processes including but not limited to injection molding, directly cutting the optic into transparent material and polishing the surface and other known and to-be-developed techniques. – One preferred method for commercial production of such a device is injection molding because of the complex shapes of the lens. – the lens can be made of any material transparent to electromagnetic energy or light including but not limited to polycarbonate, acrylic, polystyrene, and glass. – a wide variety of computational algorithms in spreadsheets or software can be used to compute an appropriate surface shape for the lens. In using such algorithms, particular attention should be paid to the percent transmission of the light at higher angles of incidence to the sur
it may be desired to provide an exit light beam that is symmetrical. – FIG. 7 represents another embodiment of an optical device according to the invention. In this embodiment, twolenses 10 are facing together, theplanar face 17 of afirst lens 10 facing theplanar face 17 of thesecond lens 10. The sagittal plane A of thelenses 10 are merging and saidlenses 10 are positioned at a given distance d. Such construction allows the generation of a symmetrical light beam in such manner that saidlens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. – It should be noted that LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In order to provide an attractive product, the dimensions of the luminary head should remain reasonably low. – One of the advantages of LEDs is miniaturization. In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. The invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. – Usually, lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. Preferably, they are made with a transparent material. This material may be colored or colorless, depending on the desired application. For instance, an appropriate materi
shown on FIGS. 2 to 4 . – a punctual lambertian light source normally leads to a round light beam. – a LED 20 may be approximated as a punctual light source. – FIG. 6 shows the effect of the lens 10 according to FIGS. 2-5 on the conical light beam emitted by a lambertian LED 20 . It appears that the rear portion 18 is optimized in order to maximize total internal reflection and therefore send to the front portion 19 light rays that would otherwise go rearward and the front portion 19 of the profile is optimized to transmit light as much as possible and therefore minimize light rays being bounced back to the rear part 18 . – FIG. 6 shows the polar representation of the light beam at the exit diopter 12 . This representation shows that the light beam is clearly asymmetrical. – FIG. 7 represents another embodiment of an optical device according to the invention. – two lenses 10 are facing together, the planar face 17 of a first lens 10 facing the planar face 17 of the second lens 10 . – the sagittal plane A of the lenses 10 are merging and said lenses 10 are positioned at a given distance d. – Such construction allows the generation of a symmetrical light beam in such manner that said lens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. – LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In
a punctual lambertian light source through an optical device as shown on figures 2 to 4. Such a light source normally leads to a round light beam. A LED 20 may be approximated as a punctual light source. 7 PCT/1B2010/054385 Figure 6 shows the effect of the lens 10 according to Fig. 2-5 on the conical light beam emitted by a lambertian LED 20. It appears that the rear portion 18 is optimized in order to maximize total internal reflection and therefore send to the front portion 19 light rays that would otherwise go rearward and the front portion 19 of the profile is optimized to transmit light as much as possible and therefore minimize light rays being bounced back to the rear part 18. Figure 6 shows the polar representation of the light beam at the exit diopter 12. This representation shows that the light beam is clearly asymmetrical. However, it may be desired to provide an exit light beam that is symmetrical. Figure 7 represents another embodiment of an optical device according to the invention. In this embodiment, two lenses 10 are facing together, the planar face 17 of a first lens 10 facing the planar face 17 of the second lens 10. The sagittal plane A of the lenses 10 are merging and said lenses 10 are positioned at a given distance d. Such construction allows the generation of a symmetrical light beam in such manner that said lens 10 can be used in the conception of luminaries generating a symmetrical light beam either an asymmetrical light beam. It should be noted that
In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. – the invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. – lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. – they are made with a transparent material. – This material may be colored or colorless, depending on the desired application. – an appropriate material is polymethacrylate, more specifically poly(methylmethacrylate). – Other transparent plastics may be used such as polycarbonates. – Optical devices according to an embodiment of the invention can be used for street luminary for instance. – Such street luminary comprises a luminary head which is provided at the top of a luminary post. – the luminary head comprises a support for a plurality of lighting devices arranged below the support of the luminary head and directed towards the ground. – Each lighting device comprises at least one light emitting diode (LED) upstream, with respect to light propagation, of at least one optical device, such as such as the embodiment of FIGS. 2 to 5 , said optical devices having substantially the same bearing, to generate an asymmetrical light beam. – LED light emitting diode – the luminary head can comprise a plurality of light emitting diodes (LED), at least one LED being arranged upstream of each optical device as described in FIGS. 2 to 5 , said o
the lens 10 and the middle part of said lens 10. However, it may be desired to provide an exit light beam that is symmetrical. It should be noted that LEDs are a good alternative to standard light sources used for street lighting. A large number of LEDs may be mounted on each luminary head to provide sufficient lighting. In order to provide an attractive product, the dimensions of the luminary head should remain reasonably low. One of the advantages of LEDs is miniaturization. In outdoor appliances, this allows for reduced thickness of the luminary head with miniaturized optics. The invention proposes optics for LEDs, easy to design and to adapt to a large range of configurations. Usually, lenses 10 according to the invention are manufactured by compression moulding or injection moulding, according to well known techniques. Preferably, they are made with a transparent material. This material may be colored or colorless, depending on the desired application. For instance, an appropriate material is polymethacrylate, more specifically poly(methylmethacrylate). Other transparent plastics may be used such as polycarbonates. Optical devices according to an embodiment of the invention can be used for street luminary for instance. Such street luminary comprises a luminary head which is provided at the top of a luminary post. The luminary head comprises a support for a plurality of lighting devices arranged below the support of the luminary head and directed towards the ground. Each
single optic-lens ( 503 – 1 ) almost cover the 60 degree of the said frame ( 5 F). So, the wide viewing angle project-image will move se around 60 degree for circle range while the top project-lens-assembly each single project lens takes 60 degree, then the big project image traveling will be around 60 degree. – any (i) different spacing for plurality of small project-lens and (ii) this embodiment is not limited for LED bulb application only it also cover the all LED outdoor light, or LED garden light, or LED seasonal light, or LED projection light, or LED patio light string, LED seasonal string light with AC-plug wire with built-in or outside switch or sensor or control the said color, brightness, selected function, change function, selected hi/low brightness, dimmable switch for desired light function, light performance; still fall within the current invention scope and claim covered. – the said LEDs ( 501 – 1 ) has narrow viewing angle so may have optional optic-lens added like FIG. 5B ( 502 – 2 ) to let the narrow light beam become wider viewing angle light beams or add the distance from the LED top to the image-carries but it will be loose some light brightness. – the said lighted shaped or tiny-image light beam will emit to top single optical-lens ( 503 – 1 ) fixed on the said frame ( 5 F) of the said projection-lens-assembly ( 503 D). – the wider viewing angle the said shaped or tiny-image light beam goes through the said each single optics-lens ( 503 – 1 ) and form th
alternative way to create a wider viewing angle or-and super bright project-image on the surface. This embodiment use more than one optic-lens (x5) (x6) has at least one has refractive or-and refractive optics-properties lens to make the LEDs (x4) light beams to pass though the 1st lens (x5) to change the narrow emit-out-angle LEDs light-beam to become many light-beam after go through the said Pt of reflective (x5) or-and refraction (x5) optics-lens (x5) and the said many light-beams emit-to and go-through the outside 2nd project or protective lens/cover (x6) which has big-arc (x6) or big-angle (x6) or flat-piece (not shown) or preferred shape including (i) dome, half ball, or at least 1.2 ball, sphere those has desired optics properties including reflective or-and refractive (x6) or-and diffusing (x15) or-and convex lens (x6) or-and made with plurality of small sections/areas/piece to form a optic-function piece (x15), or a sphere outer-piece (x6) just for protection/environment/waterproof purpose only; or, even (ii) flat-piece (not shown) for just protection purpose to make the more wider viewing angle project-images or-and lighted pattern(s) to shown on outside the LED light, or LED bulb, or LED garden light, or other LED outdoor, or LED indoor lighting device. The said 1st lens (x5) may also has texture which can be a wave type and the LEDs (1) can be more than one of blue-light and green-light or white-light LEDs (x4) with IC or-and controller to make the said LEDs color
wide viewing angle project-image will move se around 60 degree for circle range while the top project-lens-assembly each single project lens takes 60 degree, then the big project image traveling will be around 60 degree. It is appreciated any (i) different spacing for plurality of small project-lens and (ii) this embodiment is not limited for LED bulb application only it also cover the all LED outdoor light, or LED garden light, or LED seasonal light, or LED projection light, or LED patio light string, LED seasonal string light with AC-plug wire with built-in or outside switch or sensor or control the said color, brightness, selected function, change function, selected hi/low brightness, dimmable switch for desired light function, light performance; still fall within the current invention scope and claim covered. The said LEDs (501-1) has narrow viewing angle so may have optional optic-lens added like FIG. 5B (502-2) to let the narrow light beam become wider viewing angle light beams or add the distance from the LED top to the image-carries but it will be loose some light brightness. While the LEDs light beam emits to top the said image carrier (502-1) through the image carrier's (502-1) openings, printed windows, stencils, cutouts, films, slide, display-units or changeable image or display, the said lighted shaped or tiny-image light beam will emit to top single optical-lens (503-1) fixed on the said frame (5F) of the said projection-lens-assembly (503D). The wider viewing a
1. The PV used here must be exposed at an angle of about 0-30 ° to the sun and to the south to generate good power output. 2. As a result, the PV is limited to the top of a lamp and thus the area size is limited. 3. Solar lamps are usually not optimally positioned by the user to the sun, as their primary purpose is the illumination of a particular area. The PV modules are thus often in partial shade or completely absonnig. The necessary requirements according to Die in diesem Patent verwendet PV hat bei nicht optimaler Exposition einen verhältnismäßig guten Ertrag, das Problem der zufälligen Exposition einer Solarlampe wird damit gelöst. Durch die gleichzeitige Verwendung der Solarfolie als Lampenschirm und Solargenerator steht erheblich mehr Fläche zur Verfügung, was zu einem vergleichsweise deutlich hören Energieertrag führt.The PV used in this patent has a relatively good yield in non-optimal exposure, solving the problem of accidental exposure of a solar lamp. By the simultaneous use of the solar film as a lampshade and solar generator is considerably more area available, resulting in a comparatively clearly hear energy yield. Welchem technischen Problem hat sich der Anmelder gestelltWhat technical problem has the applicant faced? Eine Solarlampe soll hell und lange leuchten können. Dafür benötigt sie einen entsprechend hohen solaren Energieertrag. Die Funktion und Form einer Lampe beschränken jedoch die mögliche Größe einer integrierten PV. Durch die Wahl einer anderen P
wide view area. – the laser outdoor or laser seasonal or laser garden light may incorporate the sensor device as parent and co-pending (XX-family filed on 2010) to stop the laser light source emit light beam while people fall within the motion sensor or moving-detectors assembly pre-set safety area. – the outdoor light has the top cover is a diamond-cut optic-lens has LED light source ( 492 ) emit light-beam ( 493 ) to inner flat reflective-area to split into light beam ( 493 a ) emit to refractive case and reflected light beam ( 493 a ) to hit the inner other points and light beam pass through the wall material and deviate direction as light beam ( 493 b ) and light-beam ( 493 c ) came out from the outside surface. – LED light source 492 – LED light-beam 493 – inner flat reflective-area to split into light beam ( 493 a ) emit to refractive case and reflected light beam ( 493 a ) to hit the inner other points and light beam pass through the wall material and deviate direction as light beam ( 493 b ) and light-beam ( 493 c ) came out from the outside surface. – the LED light-beam ( 492 ) reflected into not only have ( 493 a ) but also have the 2nd reflected light-beam ( 494 ) which is reflected again by inner surface to get the LED light beam ( 495 ) and emit to cover to change direction light beam—>( 495 a ) which refracted and emitted out light beam———->( 495 b ). – the light-beam ( 494 ) also not only reflected into ( 495 ) but also have light-beam ( 494 a )—refract
d from the optical axis O, but may be located on the central optical axis O (e.g. one light source or multi-dye LED package). Further, the light sources could be placed at varied distances from the optical axis O. – Applications of the present invention include, but are not limited to, indoor environments such as office environments, home environments, hotels, and shopping centers, as well as outdoor environments. More costly and/or bulky optics for shaping light may thereby be replaced by the invention presented herein. Landscapes – Physics & Mathematics (AREA) – General Physics & Mathematics (AREA) – Optics & Photonics (AREA) – Engineering & Computer Science (AREA) – General Engineering & Computer Science (AREA) – Non-Portable Lighting Devices Or Systems Thereof (AREA) Description – The technical field of the present invention is lighting. In particular, the present invention relates to an optical component and a luminaire. – In many applications, utilizing point sources of light present challenges for developers and providers of products thereof. Examples of point sources are for instance different type of semiconductor light sources such as LEDs and OLEDs. – Further development of LEDs (Light Emitting Diodes) e.g. higher luminance, have opened new areas for their use. For instance, LEDs may nowadays be utilized in general lighting applications such as luminaires. Thereby the advantages provided by LED technology, such as narrow bandwidth lighting, enhanced control, and lo